Category: Engineering


showing 1-15 of 29

The Engineering And Mining Journal, Vol. LXXXIIII (84) , July Through December 1907

By: N/A

Price: $60.00

Publisher: 1907

Edition: First Edition

Bound in library cloth. Very clean & tight, with minimal markings. ; Ex-Library; 8vo 8" - 9" tall View more info

Lectures on Illuminating Engineering Delivered At the Johns Hopkins University, October & November, 1910, under the Joint Auspices of the University & the Illuminating Engineering Society: Volume 1

By: N/A

Price: $30.00

Publisher: Baltimore, The Johns Hopkins Press, 1911

Edition: First Edition

Small 4to 9" - 11" tall; 524 pages View more info

Pacific States Telephone and Telegraph Co. , Engineering Department Specification for Aerial Construction Specification E-190

By: Alston, F. W. (Chief Engineer)

Price: $60.00

Publisher: San Francisco, Pacific States Telephone and Telegraph Company, 1905

Edition: First Edition

Vertical format, in a binder evidently made to be carried with the worker. Bound at the top by two rivets. Worn and rubbed, the leather has split at the top hinge, leaving it attached by the underlying cloth. As stated on the front, this is copy no. 170; 8vo 8" - 9" tall; 132 pages View more info

Reinforced Masonry Engineering Handbook: Clay and Concrete Masonry

By: Amrhein, James E.

Price: $65.00

Publisher: Los Angeles, Masonry Institure of America, 1993

Edition: Fifth Edition

Includes the original errata sheets. ; Small 4to 9" - 11" tall; 468 pages View more info

A Primer of Oilwell Drilling: a Basic Text of Oil and Gas Drilling

By: Baker, Ron

Price: $70.00

Publisher: Austin, TX, Petroleum Extension Service, 2001

Edition: Sixth Edition

4to 11" - 13" tall; 192 pages View more info

Proceedings for 1914 (Volume 18) ; Constitution and By-Laws and Annual Report of the Board of Directors

By: Brooklyn Engineers' Club

Price: $75.00

Publisher: Brooklyn, NY, Office of Secretary & Library of the Brooklyn Engineers' Club, 1915

Edition: First Edition; First Printing

Covers are soiled, contents are "fine." nice section on excavation for the subways, and surveying a common data plane for New York. ; Small 4to 9" - 11" tall; 292+16 pages View more info

Geotechnical Engineering: Foundation Design

By: Cernica, John N.

Price: $50.00

Publisher: NY, John Wiley & Sons, 1995

Edition: First Edition

Small 4to 9" - 11" tall; 486 pages View more info

The Britannia And Conway Tubular Bridges. With General Inquiries On Beams And On The Properties Used In Construction. (2 Volume Set, W/o 3rd Atlas Volume)

By: Clark, Edwin & Stephenson, Robert

Price: $2,000.00

Publisher: London, Day and Son, 1850

Edition: First Edition

Rubbed at the top of the spine. Covers faded. Owner's name, & later note on the fep of volume one. ; Large 8vo 9" - 10" tall View more info

Municipal Engineering, a Montly Magazine Devoted to the Improvement of Cities. Vol. XVI (16) , No. 1; January, 1899

By: Fortune, William (Ed. )

Price: $25.00

Publisher: Indianapolis, Municipal Engineering Co., 1899

Edition: First Edition

Covers are slightly soiled, small chip at the top of the spine. ; Small 4to 9" - 11" tall; 68+ads pages View more info

Earthquake Damage and Earthquake Insurance: Studies of a Rational Basis for Earthquake Insurance, Also Studies of Engineering Data for Earthquake Resisting Construction

By: Freeman, John Ripley

Price: $40.00

Publisher: NY, McGraw Hill, 1932

Edition: First Edition

Bookplate inside the front cover, "to.... With the compliments of John r. Freeman". 3 page brochure tipped inside the back cover, "some after-thoughts by JRF and a few notes from the Suyehiro lectures". ; 8vo 8" - 9" tall; 904 pages View more info

Petroleum Production Handbook (2 Volume Set) Volume 1: Mathematics, Production Equipment; Volume 2: Reservoir Engineering

By: Frick, Thomas C. (Ed. ) & Taylor, R. William

Price: $75.00

Publisher: NY, Mcgraw Hill, 1962

Edition: First Edition

Slight crease in the spine of volume 2, some chipping & tape reinforcing to the DJ's. ; Large 8vo 9" - 10" tall View more info

Seismic Design Using Structural Dynamics 2006 Ibc; 2009 Ibc; Asce/sei 7-05

By: Ghosh, S. K. ; Kim, Jaehong; Shad, Farhad H.

Price: $35.00

Publisher: International Code Council, 2009

Edition: First Edition

Small 4to 9" - 11" tall; 204 pages View more info

The Western Engineer: Containing Tables, Rules and Practical Information for the Use of the Owner, Engineer and all Interested in the Use of Steam Engines and Boilers

By: Godbold, John H.

Price: $60.00

Publisher: San Francisco, G. W. Gordon, 1890

Edition: First Edition

Covers damp damaged at the top of the spine. ; 8vo 8" - 9" tall; 170 pages View more info

The Iconographic Encyclopedia Vol. 6 (Applied Mechanics)

By: Grimshaw, Robert

Price: $195.00

Publisher: Philadelphia, Econographic Publishing Co., 1890

Edition: First Edition

Bound in three-quarter brown leather. Complete with 128 plates. ; 11"; 418 pages View more info